Ledge and brace doors are popular for use on barn-style sliders. They can be built up to 3000 x 3000mm. They are typically between 50 and 70mm thick. They are difficult to weather seal, so they are not recommended for exterior doors. A barn style slider will look fantastic with a Ledge and Brace door, but there are some limitations.

Traditional design

Traditional ledge and brace doors are a great choice for older homes. They provide a classic look with a high degree of security. The braces between the ledges are attached with screws or nails. Care should be taken not to use nails that are too long or too short, as they may break.

Ledge and brace doors are usually made of timber, usually oak. They are available in a variety of finishes. They can be finished in clean dressed or wire brushed finishes. They can also be painted to give them a more contemporary look.

Common materials

Almost all ledge and brace doors are made from timber, with oak being the most common material used. But these doors can also be made from pressure-treated softwood. They also come in a variety of different finishes, including clear raw effect oil and darker stains. You can also choose to paint the door to create a contemporary look.

Ledger and brace doors are usually made of timber, and their ledges are glued or screwed to the front of the door. To keep the door from sagging, use screws instead of nails. However, oak ledge and brace doors if you’re using nails, be sure that they’re not too long. Otherwise, you could damage the point.


Ledge and brace doors are very heavy and are often used in large applications. The construction of these doors is not suitable for a beginner carpenter and requires some experience. Softwood pressure treated to a moderate degree is a suitable choice for most applications. You will need three different sizes of timber, preferably full thickness, for the top rail and both stiles, and thinner stock for the lower rails. You will also need suitable planking for the door cover. This can be a traditional T&G or matching planking to fit the timber.

A traditional ledge and brace door is made using diagonal and horizontal beams of wood. Its construction allows it to be very sturdy and is particularly suitable for homes with a rustic theme. These types of doors are also commonly used in sheds and gates. These doors are made with a high-quality wood for strength and durability.


When choosing a new finish for your ledge and brace door, keep in mind that ledge and brace doors can be painted or stained. Painting an existing door is a bit more difficult, so it’s best to remove any existing coatings, such as varnish, before applying the new finish.

First, you should make sure that you cut the top and bottom ledges to the same height and width. You should also cut the rails squarely to avoid unevenness. Remember, these two elements will also affect the flatness of your finished door.


Ledge and brace doors are a popular style of door. Typically, these doors are made of timber and are available in a range of colours. Oak is a popular choice for Ledge and Brace doors and is the most common material used. Oak is durable and comes with a natural grain, which suits country style properties. Ledge and brace doors are also available in painted or varnished finishes.

Another advantage of ledge and brace doors is their increased security. These doors can protect your property in the event of a fire and give you more time to get out safely. The best ledge and brace doors have a fire-rated option for added safety.